Diagnose your Xerox printer ink cartridge problem

If there is a problem in the Xerox printer ink quality then you must need to configure your printer settings or replace the ink toner if your printer is running out of ink. Ink cartridge issue is the common problem that every printer owner faces. The Xerox printer machine is one of the user-friendly machines that give you easy access to its feature, unlike complicated machines. Anyone can do the basic steps to rectify the machine if in case they encounter any. If your printer is printing in a single color, replace the toner cartridge or if the symptom appears in all color replace the imaging unit, fuser, fuser roll or main charge grid or transfer kit.

Diagnose the problem on your Xerox printer do follow the mention steps carefully-

Check the front panel for messages on replacing supplies.
On the help menu, scroll down the page to supplies information, press OK and print the supplies page.
Go to the help menu again and this time, select print quality, press the menu button. Scroll down to Help pages, press Menu, and print diagnostic test pages. Check the page precisely and examine the symptoms.

If a page has vertical lines or streaks:

Adjust the color density of your printer machine.
On the help tab, go to the print quality, press menu and navigate to calibrate colors.Then select menu, click to Adjust Each Color and then hit the menu button.
Configure the density of the color.

If all four print out have a streak, random spot:

Run clean for smudges, press the help button, and scroll to print quality. Press the menu button and navigate to clean for smudges.
Then press ok and hit the confirm button.
Replace imaging unit, fuser or fuser roll.
If all pages come solid black:
Remove and then re-insert the main charge grid. If the problem still appearing change the main charge grid.
Also, ensure the ink level.

If the four color sheets are faded:

Select any media for further process.
Use Xerox media and select the correct media tray.
While using the multi-purpose tray, choose the correct media in the panel.
Refer to calibrate for paper in the printer’s front panel and run this mode.
Hit the help button scroll down to the print quality and then click on Menu and then select calibrate for paper and configure the transfer setting.
Change the imaging unit or transfer kit.

Kindly ensure the above-listed steps precisely and resolved your problem completely. If still, the problem persists, contact our technicians and see your problem resolved in the shortest time by our super talent and diligent experts. They are educated and experienced enough to resolve every single problem and render you the accurate way out. To reach us, you can dial our number at Xerox Repair Service Center and avail our services.

Comments